The periodic vehicle inspection – called MOT, TÜV, contrôle technique, ITV or simply the technical inspection depending on where you live – is a source of stress for many drivers. What exactly is checked, why do cars fail and how do you pass first time? This guide covers the essentials and gives you a car inspection checklist you can go through at home.

How often does a car need an inspection?

EU rules set a minimum for passenger cars: the first roadworthiness test no later than four years after first registration and then at least every two years. Many countries are stricter. Slovenia, for example, uses a 4 – 2 – 1 rhythm: first inspection after four years, the second two years later and then every year. Outside the EU, such as in the UK, the schedule is different. Check your registration document or national authority for your exact due date.

What is checked?

  • brakes – braking force on a roller tester, balance between left and right, and the handbrake,
  • lights and signalling – every bulb, headlight aim and the condition of headlight lenses,
  • steering and suspension – play, boots, shock absorbers, springs and corrosion on load-bearing parts,
  • tyres and wheels – tread depth, damage and correct size,
  • exhaust and emissions – leaks and an exhaust gas measurement,
  • visibility – cracks in the windscreen in the driver’s field of view, wipers and washers,
  • safety equipment – seat belts, horn and mandatory equipment,
  • identification – chassis number (VIN) and number plates.

The most common reasons for failing

Blown bulbs and badly aimed headlights

The most common and most easily avoided fault. Check every light before the test: dipped and main beams, indicators, brake lights, reversing light, fog lights and number plate light.

Cloudy or yellow headlights

Oxidised headlight plastic scatters light and reduces range. Headlight restoration – polishing plus a UV-protective coat – is far cheaper than new headlight units.

Brakes

Worn pads, rusty discs or uneven braking force between wheels often mean a fail. If the car pulls to one side under braking or you hear squealing, have it checked at a garage first.

Tyres

Insufficient tread, sidewall cracks or different tyres on the same axle are frequent reasons for rejection.

Windscreen damage

A crack or chip in the driver’s field of view can fail the test. Small chips can often be repaired; larger cracks require a new windscreen. See repair or replace your windshield.

Warning lights on the dashboard

A lit engine, ABS or airbag warning light indicates a system fault. The quickest way to find the cause is a computer diagnostic scan.

Pre-inspection checklist

  1. Check all lights – easiest with someone standing behind the car.
  2. Check tread depth and tyre pressure.
  3. Top up washer fluid and check the wipers.
  4. Make sure the horn works.
  5. Check that every seat belt latches and retracts.
  6. Check the mandatory equipment required in your country, such as a warning triangle, high-visibility vest and first-aid kit.
  7. Make sure no warning lights are on.
  8. Bring the registration document and your ID.

Is a service before the inspection worth it?

For an older car, high mileage or an overdue service, a pre-inspection check at a garage is almost always cheaper than a re-test. A mechanic can check brakes, suspension and lights in minutes and fix faults before the inspector finds them. Read more in our car service and maintenance guide.

What if the car fails?

You will receive a report listing the defects. Have them repaired and return for a re-test, which usually checks only the items that failed. Deadlines and fees for re-tests differ by country and test centre.

Find a garage near you

Kardet lists garages and service centres across Europe. Browse the car service category or send a free request and choose the offer that suits you.

Read also: Most Common MOT Failures and How to Avoid Them · DVSA MOT Photos 2026: What the New Rollout Means for Drivers